Ref. : http://www.infolink.com.au/c/Lorient-Australia/Fire-door-upgrade-seals-available-from-Lorient-Australia-n909700
Available from Lorient Australia , FDBU60 fire door upgrade seals are used to upgrade existing fire doors where the bottom of the door has a gap that exceeds 10mm. This gap measurement is the maximum gap allowed on fire doors according to AS1905/1.
FDBU60 fire door seals are retrofitted to fire doors to help provide up to 2 hours fire resistance, and helps to reduce costs associated with fire door replacements or door build-ups. They can even be installed while the door is in place, meaning that it will not need to be removed from its hinges.
These fire door upgrade seals can be used in combination with Lorient Integrity 4000 Series Threshold Plates to address disability compliance issues as well as aesthetics.
FDBU60 fire door seals are supplied with pre-drilled slotted holes and screws to ensure they are easily fixed to the bottom of door leafs. They can be used to seal gaps up to 60mm on 35mm and 45mm proprietary doors.
Further information on the range of fire door upgrade seals is available from Lorient Australia.
No comments:
Post a Comment